Extreme AP410i (AP410i-WR)

Extreme AP410i (AP410i-WR)

Extreme AP410i : Tri Radio 802.11ax - 4x4:4 + 2x2:2, Full time 2x2:2 Sensor, Indoor Internal Antenna Access Point.

Mã sản phẩm: AP410i-WR
Giá List: $
Đặt Hàng Ngay

Thiết bị phát sóng Wifi Extreme AP410i

Model AP410i
Interfaces • (1) 100/1000/2500 Mbps auto-negotiation Ethernet port, RJ45 PoE (Power over Ethernet 802.3at) Port
• (1) 10/100/1000 Mbps auto-negotiation Ethernet port, RJ45
• USB3.0, Type A , 0.5A
Radio Specifications Max Users
• SSID per Radio/Total: 8/16
• Users per Radio/total: 512/1024
802.11n
• 2.4–2.5 GHz & 5.150–5.850 GHz Operating Frequency
• 802.11n Modulation
• HT20 High-Throughput (HT) Support (for both 2.4 GHz and 5 GHz)
• HT40 High-Throughput (HT) Support for 5 GHz
• A-MPDU and A-MSDU Frame Aggregation
802.11ac
• 5.150–5.850 GHz Operating Frequency
• 802.11ac Modulation (256-QAM)
• Rates (Mbps): MCS0 – MCS31 (6.5MBps - 600Mbps)
• 5G: 4x4 Multiple-In, Multiple-Out (MIMO) Radio
• 2.4G: 2x2 Multiple-In, Multiple-Out (MIMO) Radio
• Rates (Mbps): MCS0–MCS9 (6.5Mbps – 3467Mbps), NSS = 1-4.
• 4x4:4 Stream Multiple-In, Multiple-Out (MIMO) Radio
• VHT20/VHT40/VHT80/VHT160 support
• TxBF ( Transmit Beamforming)
802.11ax
• 2.4–2.5 GHz & 5.150–5.850 GHz Operating Frequency
• 802.11ax Modulation (1024-QAM)
• Dual-band OFDMA
• Rates (Mbps):
• 5G: HE0-HE11 (8 Mbps – 4800 Mbps)
• 2.4G: HE0-HE11 (8Mbps – 574 Mbps)
• HE20/HE40/HE80/HE160 support for 5 GHz
• HE20/HE40 support for 2.4 GHz
• DL SU-MIMO and MU-MIMO
• TxBF (Transmit Beamforming)
IOT Radio • BLE Radio Bluetooth® Low Energy (BLE) and IEEE® 802.15.4 compliant
Power Specifications • IEEE 802.3at PoE Power
Power Options • Power Draw: Typical: 14.6 W; Max: 18.7 W (w/o USB)
                               Typical: 17.6 W; Max: 21.7 W (w/ USB)
• 802.3at Power over Ethernet (PoE) capable
• Gigabit Ethernet port (RJ-45 power input pins:
• Wires 4,5,7,8 or 1,2,3,6)
• 802.3af Power over Ethernet injector
Physical • 6.5" x 7" x 1.8" (165mm x 180mm x 47mm)
• AP410i/e: 1.5 lbs
Antennas AP410i - Internal Antennas
• (2) Integrated single band, 2.4-2.5 GHz omnidirectional antennas
• (4) Integrated single band, 5.1-5.8 GHz omnidirectional antennas
• (2) Integrated dual band, 2.4-2.5 GHz and 5.1-5.8 GHz omnidirectional antennas for Sensor
• (1) Integrated single band, 2.4-2.5 GHz omnidirectional antennas for BLE
Mounting • Wall, and flat tile and 15/16" wide tbar, mount included as part of AP.
• Built-in slot for Kensington type locks
• 5/8" Ceiling tile protrusions on 9/16". 15/16" and 1.5" wide t-bars sold as an accessory
• Flush ceiling tiles with 9/16". 15/16" and 1.5" wide t-bars sold as an accessory
Environmental • Operating: AP410i: 0 to 50°C
• Storage: -40 to 70°C
• Humidity: 0% to 95% (non-condensing)